Heat Pump and Buffer Combined Pre Plumbed Options by UK Cylinders

3 port full bore, 28mm compression DHW & CH valve. 

4 bar pressure gauge. 

Fill & flush valve with servicing ports. Useful to fill and flush the system with cleaning chemicals or water treatment.

Optional 8m circulating pump for primary circuit.

6m Circulating pump supplied fitted for heating circuit.

G3 compliant cold feed pipework, inc. tundish, drain point, filling loop and 3 bar inlet control set.

Our 28mm full bore, high gain, high flow coil reduces noise and improves recovery times.

Robokit / T&P insulation cover and potable expansion vessel is also supplied. 

Factory fitted immersion heater, for emergency backup this can be linked to a heat pump for an anti legionella cycle where required.

12mm sensor probe pocket.

Buffer provides hydraulic separation and minimum system volume.

COMES COMPLETE WITH 12LTR HEATING EXPANSION VESSEL - SUPPLIED LOOSE.